Please ask for a suitable steerer for your bike before you buy!!
I have steerer for most of the older Marzocchi suspension forks in almost every size and dimensions – I own round about 500 pieces, used or new – most of them are original from Marzocchi!
Also check my new DR-ZOCCHI Aluminium Steerer produced in the Marzocchi Style, HQ CNC lathed, optimized for pressing!!
Add the following informations about the steerer to your request:
For use in most of the Marzocchi forks:
- StarFork, PF1, MX100, XC100, XC 150, XC200, XC300, XC50, XC51, XC400, XC500, XC600, XC700, XCR, DH3, …
- for Bombers
- and others
+++ We can also repress Steerer : For XC and Bomber Forks Crowns a Pressing Service is available! +++
When mounting the Oil Seals put crease between the inner lips of the seals before pushing the stanchions in!
Important : Use a suitable tool to press the Oil Seal verticaly in!! If you don’t do that, the metal skeleton will bend.
Seals ‘Break-in Period’
“Some forks may require 5-10 hours of use before the fork fully breaks-in. After the bushings, seals, and other parts have matched to each other, the fork will move smoother. The tight tolerances make the fork last longer and work better.” (original text from Marzocchi Bomber Technical Information (2000) )
Knob / Dial Installation Instructions
Please glue the little screw of the dials with a little bit of middle hard screw glue. And use heat if you want to take it off than.
Please use the sticker only in conditions >=20°C environment to make sure the glue will work and make the tubes oil- and grease-free using isopropanol etc.
Not sure about your Forks Seal size and Type???
Check my personal Marzocchi FORK <-> SEALS Database!!
Dimensions of Marzocchi Steerer
|Zoll||Steerer mm (top)||Steerer mm (bottom)
|1 "||25,400 mm||ca. 27,20 mm
|1 1/8 "||28,575 mm||ca. 30,15 mm
|1 1/4 "||31,750 mm||ca. 33,00 mm
You will receive your goods from us fast! After receipt of payment, you can expect packaging, shipping delivery of your parcel ASAP.
All sendings will be sent tracked!
Shipping takes usual 1-3 days in GER using DHL, but might take longer in EU and world wide (Hermes / DHL).
Stickers will be send by ‘Deutsche Post international registered letter’.
Please allow 7-14 days for rebuilding depending on work load. Sometimes I need more time depending on current family needs 😉 <br>