Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.)
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 2
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 3
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 4
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 5
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 6
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 7
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 8
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 9
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 10
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 11
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 12
Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.) - Image 13

Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.)

159,99 € VAT included

Replacement Crowns for all Marzocchi XC forks from the 90’s :

This Shop Offer is about the very rare boltened Fork Crowns like StarFork, PF1, MX100, XC100, XC 150, XC200, XC250, XC300, XC50, XC51, XC50H, XC400, XC500, XC600, XC700, XCR, DH3 and brand forks which based on Marzocchi Forks like GT, Kästle HDB0x, Giant EGS, Fuchs Sport, Scott Xtrashocks etc.

All my sold Fork Crowns will include a SCREW-SET for FREE!

SKU: XC marzocchi_crown_24-26 Categories: , , , , , , , , , , , , , , , , , , Tags: ,

Frequently Bought Together

Marzocchi original Replacement / Spare Crown XC 24 or 26mm boltened (e.g. XC50/51, XC400, XC500, XC600, XC700, XCR, DH3 etc.)+DR-ZOCCHI Ahead Steerer 1,25 Alu 7075 250mm black+Shim Aluminum
Price for all:   227,98 €

Please ask for a suitable crown for your bike!!

Also check my new DR-ZOCCHI Aluminium Steerer produced in the Marzocchi Style, HQ CNC lathed, optimized for pressing!!

I have almost every size, dimensions and colour for the Marzocchi XC 24mm or 26mm suspension fork crown from the 90’s, with pressed-in or bolted steerer.

This shop offer is about the very rare boltened ones! Pressed-in ones are here.

Please add the following informations about the steerer to your request:

  • fork type and name
  • the steerers required overall length
  • steerer : should it be threaded or not?

Seals Assembling
When mounting the Oil Seals put crease between the inner lips of the seals before pushing the stanchions in!
Important : Use a suitable tool to press the Oil Seal verticaly in!! If you don’t do that, the metal skeleton will bend.

Seals ‘Break-in Period’
“Some forks may require 5-10 hours of use before the fork fully breaks-in. After the bushings, seals, and other parts have matched to each other, the fork will move smoother. The tight tolerances make the fork last longer and work better.” (original text from Marzocchi Bomber Technical Information (2000) )

Knob / Dial Installation Instructions
Please glue the little screw of the dials with a little bit of middle hard screw glue. And use heat if you want to take it off than.

Sticker Instructions
Please use the sticker only in conditions >=20°C environment to make sure the glue will work and make the tubes oil- and grease-free using isopropanol etc.

[20220114] Ebay Bewertung erhalten von Dario De Santis, Italien
Product sold : Marzocchi Bomber’s REBUILD-KIT ‘COMPLETE’ for Z1 (BAM) & Z2 (BAM) 30mm ‘classic’
“Venditore preciso e affidabile al 100% Tutto perfetto anche con piccolo regalo ?? Consigliatissimo!”

[20210911] Siro from Trieste, Italy  – Fork : Marzocchi Z3 1997
Product sold : 30mm Bomber ‘classic’ Seal kit
“Buongiorno, i pezzi per la bicicletta sono arrivati e le caramelle per me anche!!!
Buone le caramelle e anche i paraolio e para polvere, fantastici!!
Voi sapere quanto olio devo mettere dentro alle forcelle? (Marzocchi Z3 del 97)
Grazie. Un saluto da Trieste.”

[20210903] Ralf from Nürnberg, Germany – Fork : Marzocchi Z3
Product sold : Full Fork Service Z3
“Hallo Marcus, 
die Gabel ist angekommen und ich bin begeistert! Vielen Dank auch für die zusätzlichen Dichtringe und die Gummibärchen!!!
Wie kann ich die Dämpfung etwas weicher einstellen und welche Funktion haben eigentlich die Einstellschrauben jeweils auf den Standrohren?
Beste Grüße, 
Ralf”

Not sure about your Forks Seal size and Type???

Check my personal Marzocchi FORK <-> SEALS Database!! 

Dimensions of Marzocchi Steerer

ZollSteerer mm (top)Steerer mm (bottom)
1 "25,400 mmca. 27,20 mm
1 1/8 "28,575 mmca. 30,15 mm
1 1/4 "31,750 mmca. 33,00 mm

SHIPPING TIME
You will receive your goods from us fast! After receipt of payment, you can expect packaging, shipping delivery of your parcel ASAP. 
All sendings will be sent tracked! 
Shipping takes usual 1-3 days in GER using DHL, but might take longer in EU and world wide (Hermes / DHL). 
Stickers will be send by ‘Deutsche Post international registered letter’. 

REBULDS
Please allow 7-14 days for rebuilding depending on work load. Sometimes I need more time depending on current family needs 😏

Related products

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping
      Calculate Shipping