69,99 €
All Marzocchi Models with 24mm Stanchion tubes:
Marzocchi Models: XC500 / XC400 / XC50 / XC51 / XC50H / XC300 / XC250 / XC200 / XC150 / XC100 / MX100 / Star Fork / PF1 / StarFork etc. and branded forks aká Kästle HDB 01, Fuchs Sport, Scott’s Xtrashocks etc.
Hint: This is a set for XC500, so you might need not all of this included parts for your older 24mm fork!
If you own a XC400 or other fork with oil/air separator plug another kit might be the better choice for you!
8 in stock (can be backordered)
This is a full set to do a Service or Rebuild!!
E.g. had been included in this original Marzocchi Kits :
Articles will be send in an original Marzocchi package, OEM or a custom bag. Seals and Parts are Originals or 1:1 Reproductions, 100% working as the Originals!!
Seals Assembling
When mounting the Oil Seals put crease between the inner lips of the seals before pushing the stanchions in!
Important : Use a suitable tool to press the Oil Seal verticaly in!! If you don’t do that, the metal skeleton will bend.
Seals ‘Break-in Period’
“Some forks may require 5-10 hours of use before the fork fully breaks-in. After the bushings, seals, and other parts have matched to each other, the fork will move smoother. The tight tolerances make the fork last longer and work better.” (original text from Marzocchi Bomber Technical Information (2000) )
Knob / Dial Installation Instructions
Please glue the little screw of the dials with a little bit of middle hard screw glue. And use heat if you want to take it off than.
Sticker Instructions
Please use the sticker only in conditions >=20°C environment to make sure the glue will work and make the tubes oil- and grease-free using isopropanol etc.
Not sure about your Forks Seal size and Type???
| Zoll | Steerer mm (top) | Steerer mm (bottom) |
|---|---|---|
| 1 " | 25,400 mm | ca. 27,20 mm |
| 1 1/8 " | 28,575 mm | ca. 30,15 mm |
| 1 1/4 " | 31,750 mm | ca. 33,00 mm |
SHIPPING TIME
You will receive your goods from us fast! After receipt of payment, you can expect packaging, shipping delivery of your parcel ASAP.
All sendings will be sent tracked!
Shipping takes usual 1-3 days in GER using DHL, but might take longer in EU and world wide (Hermes / DHL).
Stickers will be send by ‘Deutsche Post international registered letter’.
REBULDS
Please allow 7-14 days for rebuilding depending on work load. Sometimes I need more time depending on current family needs 😉 <br>
Axle Clamp QR20 Axle Clamp (2001 - 2002+) - IN PRODUCTION NOW!! ETA June 2023
24,99 €
