Sale!

REBUILD KIT ‘COMPLETE’ v2.0 for Marzocchi Bomber SHIVER DC 35mm – SAVE 40%!! AVAILABLE NOW!!

159,00 199,00 

This REBUILD package v2.0 ‘COMPLETE’ is about all you need to rebuild your Marzocchi SHIVER 35mm Fork DIY!! 🎈🎁🛠💊

It includes 2 Set’s of Seals, Tools, Knobs, Screws, Marzocchi Ahead Cap, O-Rings & Bits for Cartridge and more!
You’ll receive massive more parts than included in the original Marzocchi Repair Set (not available anymore)!

Optional you can buy a set of NEW SHIVER Guards for a Special discounted Price!

Also new Top Caps with inflating Screw are available – you can choose out of 3 colours!!

Buy this Package and save >>40%!!

Frequently Bought Together

Marzocchi Shiver 35 complete v2+DR-ZOCCHI Ahead Steerer 1,25 Alu 7075 250mm black+SHIVER DC 35mm Top Cap black+Marzocchi Ahead Cap Fear Nothing ready+Marzocchi ECC Lever Aluminium black+
Marzocchi Axle Monster 2003+
YITH Badge
+
SHIVER DC 35mm Protector NG collage
YITH Badge
Price for all:   457,83 

Single Prices :

  • 2x (!!) Seal-Kit 35mm á 42,50 = 85,00€ ✨🎈
  • Marzocchi Ahead Cap ‘Fear Nothing’ = 19,99 (you can select the colour you want out of 9 colours!!) 🎈
  • 1x Slider Protector Tool = 24,99€
  • 1x Oil Seal Insertion Tool = 24,99€
  • 2x new Knobs black incl. Screws = ~30,00€ (you can choose out of 4 colours!!) 🎈
  • 2x O-Rings Footnut
  • 2x O-Rings Top Cap 35mm
  • 2x O-Rings Top Cartridge
  • 2x O-Rings inner Compression Cartridge Needle
  • 2x O-Rings for the deflating screw in the top cap (not all Shivers)
  • 2x C-Rings top Cartridge made out of stainless steel
  • 1x SAG O-Ring (incl. in the seal kits)
  • a full Set of Screws – including Protector Screws
  • a NEW SET of BUMPERS (as of Kit v2.0) created in 2023 🎈
  • Optional you can buy a HQ Set of NEW SHIVER Guards here!! 🎈🎈
  • Optional you can buy a HQ Set of NEW SHIVER DC Top Caps!! 🎈🎈
  • optional including an ECC Lever out of Aluminium!! (not all Shiver’s!), if needed (you need to tell me before I have send the package, please!)

Please check details with your fork here in exploded manuals => –> Marzocchi Manuals : http://public-repository.org/

Contents may change in future!

Additional Ideas :

  • a new Set of Bushings (upper & lower)
  • Spring Update?
  • New advanced Aluminium Steerer reinforced for pressing in

Seals Assembling
When mounting the Oil Seals put crease between the inner lips of the seals before pushing the stanchions in!
Important : Use a suitable tool to press the Oil Seal verticaly in!! If you don’t do that, the metal skeleton will bend.

Seals ‘Break-in Period’
“Some forks may require 5-10 hours of use before the fork fully breaks-in. After the bushings, seals, and other parts have matched to each other, the fork will move smoother. The tight tolerances make the fork last longer and work better.” (original text from Marzocchi Bomber Technical Information (2000) )

Knob / Dial Installation Instructions
Please glue the little screw of the dials with a little bit of middle hard screw glue. And use heat if you want to take it off than.

Sticker Instructions
Please use the sticker only in conditions >=20°C environment to make sure the glue will work and make the tubes oil- and grease-free using isopropanol etc.

[20220114] Ebay Bewertung erhalten von Dario De Santis, Italien
Product sold : Marzocchi Bomber’s REBUILD-KIT ‘COMPLETE’ for Z1 (BAM) & Z2 (BAM) 30mm ‘classic’
“Venditore preciso e affidabile al 100% Tutto perfetto anche con piccolo regalo ?? Consigliatissimo!”

[20210911] Siro from Trieste, Italy  – Fork : Marzocchi Z3 1997
Product sold : 30mm Bomber ‘classic’ Seal kit
“Buongiorno, i pezzi per la bicicletta sono arrivati e le caramelle per me anche!!!
Buone le caramelle e anche i paraolio e para polvere, fantastici!!
Voi sapere quanto olio devo mettere dentro alle forcelle? (Marzocchi Z3 del 97)
Grazie. Un saluto da Trieste.”

[20210903] Ralf from Nürnberg, Germany – Fork : Marzocchi Z3
Product sold : Full Fork Service Z3

“Hallo Marcus, 
die Gabel ist angekommen und ich bin begeistert! Vielen Dank auch für die zusätzlichen Dichtringe und die Gummibärchen!!!
Wie kann ich die Dämpfung etwas weicher einstellen und welche Funktion haben eigentlich die Einstellschrauben jeweils auf den Standrohren?
Beste Grüße, 
Ralf”

Not sure about your Forks Seal size and Type???

Check my personal Marzocchi FORK <-> SEALS Database!! 

SHIPPING TIME
You will receive your goods from us fast! After receipt of payment, you can expect packaging, shipping delivery of your parcel ASAP.
All sendings will be sent tracked!
Shipping takes usual 1-3 days in GER using DHL, but might take longer in EU and world wide (Hermes / DHL).
Stickers will be send by ‘Deutsche Post international registered letter’.

REBULDS
Please allow 7-14 days for rebuilding depending on work load. Sometimes I need more time depending on current family needs 😉 <br>

Subscribe To My Newsletter!

Join my Mailing List to receive the latest News and Updates from Dr_Marzocchi!

You have Successfully Subscribed!

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Calculate Shipping