Sale
V-Brake PIN KIt 2006 850996-C
YITH Badge

Marzocchi Cantilever Socket V-Brake PIN (2006-2008) for MARATHON, MZ, MX, XC 600, Corsa, Gran Fondo Forks – 850996/C comp – IN PLANING!!

Original price was: 32,00 €.Current price is: 24,99 €. VAT included

This product is about a remastered Marzocchi Canti Socket PIN 2006 created out of Stainless Steel / V2Al!

Mit Distanzhülse?

Available on back-order

SKU: bomber_canti-socket_v-brake pin 2006 Categories: , , , , , , , , , , , , , , , , , , , , , , , , , , , , Tags: , , , , , , , , , , , , ,

Weigth : about XX gr / pcs
Length : 61,5 mm
Content : Brake Stud & Spacer Kit, …
Surface : blank, stainless steel & Aluminium (Spacer?)
Material : Special custom version made out of 1.4301, is also known under the materialnames X5CrNi18-10, AISI 304 or V2A steel
Comparable Marzocchi Art. No : Replaced by complete Kit 850996/C; 5321115QF>A : Canti-Pin XC ´03-08 A, REPLACES: EXRFSB241; 5321115QFA
Ebay Art. No ePID : 18027756143

Forks Compatibility : 

YearModelNameModelType
2006Gran fondoGran Fondo 1 - 120
2006MarathonMarathon Race
2006MXMX Pro TAS 100 > 120
2006MXMX Comp TAS
2006MarathonMarathon XC RC
2006MarathonMarathon SL Doppio Air
2006MXMX Pro ETA - 105
2006Gran fondoGran Fondo 1 - 105
2006MXMX Comp - 120
2006MZMZ II - 100
2006MXMX Pro ETA - 120
2006MZMZ III - 100
2006MXMX Pro - 120
2006MZMZ I - 120
2006Gran fondoGran Fondo 2 - 120
2006Gran fondoGran Fondo 2 - 105
2006MZMZ I - 100
2006MXMX Pro Race - 85
2006MXMX Comp - 105
2006MZMZ II - 120
2006Gran fondoGran Fondo 3 - 120
2006MXMX Pro SL - 105
2006MXMX Pro SL - 120
2006MXMX Pro - 105
2006Gran fondoGran Fondo 1 RC - 105
2006Gran fondoGran Fondo 1 RC - 120
2006MXMX Pro SL - 105 RC
2006MZMZ I - 80
2006MXMX Comp ETA - 105
2006Gran fondoGran Fondo 3 - 105
2006MXMX Comp - 85
2006MarathonMarathon XC
2006MZMZ III - 120
2006MarathonMarathon Race RC
2006MXMX Comp ETA - 120
2007MXMX Pro LO RC - 100
2007CorsaCorsa SL World Cup - 80
2007XCXC 500 - 130 - TST 5
2007MZMZ Super Comp - 100
2007MZMZ Comp - 100
2007XCXC 500 - 130 - TST 5 RC
2007MXMX Pro ETA - 120
2007XCXC 700 - 100
2007XCXC 500 - 100 - TST 5
2007XCXC 400 - 130
2007MXMX Pro - 100
2007XCXC 700 SL
2007XCXC 500 - 100 - TST 5 - RC
2007XCXC 500 - 100 - TST 2
2007MZMZ Super Comp - 120
2007MXMX Pro LO RC - 120
2007XCXC 600 - 100
2007XCXC 600 SL
2007CorsaCorsa SL World Cup - 100
2007MXMX Pro ETA - 100
2007XCXC 400 - 100
2007MZMZ Race - 120
2007XCXC 600 - 130
2007MXMX Pro - 120
2007MXMX Pro LO - 100
2007MXMX Pro LO - 120
2007MXMX Pro - 80
2007XCXC 700 - 130
2007CorsaCorsa SL Race - 80
2007XCXC 600 Remote Control - 100
2007XCXC 500 - 130 - TST 2
2007CorsaCorsa SL Race - 100
2007XCXC 600 Remote Control - 130
2007MZMZ Race - 100
2007MZMZ Comp - 120
2008MZMZ COMP - 80
2008MZMZ RACE - 120
2008MZMZ RACE RC - 80
2008MXMX LO RC - 120
2008XCXC 600 TST2 RC - 120
2008XCXC 600 TST2 RC - 140
2008MarathonMARATHON CORSA SL World Cup - 80
2008MZMZ RACE RC - 120
2008MZMZ COMP - 120
2008MXMX PRO LO - 80
2008MarathonMARATHON CORSA LT - 120
2008XCXC 600 ATA2 RC - 90 >130
2008XCXC 600 TST2 RC - 100
2008XCXC 600 TST2 - 140
2008MarathonMARATHON CORSA SL World Cup - 100
2008MZMZ RACE RC - 100
2008MZMZ RACE - 80
2008MXMX PRO LO - 100
2008MXMX PRO LO RC - 100
2008MarathonMARATHON CORSA LT - 100
2008XCXC 700 ETA RC
2008MZMZ SUPERCOMP - 100
2008XCXC 500 R - 140
2008MXMX LO - 120
2008XCXC 600 TST2 - 120
2008XCXC 600 ATA2 RC - 100 >140
2008MZMZ RACE - 100
2008XCXC 600 TST2 - 100
2008MXMX PRO LO - 120
2008MZMZ COMP - 100
2008MXMX LO - 100
2008XCXC 700 ATA RC
2008MXMX PRO LO RC - 120
2008XCXC 500 ETA - 100
2008MXMX LO RC - 100

Seals Assembling
When mounting the Oil Seals put crease between the inner lips of the seals before pushing the stanchions in!
Important : Use a suitable tool to press the Oil Seal verticaly in!! If you don’t do that, the metal skeleton will bend.

Seals ‘Break-in Period’
“Some forks may require 5-10 hours of use before the fork fully breaks-in. After the bushings, seals, and other parts have matched to each other, the fork will move smoother. The tight tolerances make the fork last longer and work better.” (original text from Marzocchi Bomber Technical Information (2000) )

Knob / Dial Installation Instructions
Please glue the little screw of the dials with a little bit of middle hard screw glue. And use heat if you want to take it off than.

Sticker Instructions
Please use the sticker only in conditions >=20°C environment to make sure the glue will work and make the tubes oil- and grease-free using isopropanol etc.

[20220114] Ebay Bewertung erhalten von Dario De Santis, Italien
Product sold : Marzocchi Bomber’s REBUILD-KIT ‘COMPLETE’ for Z1 (BAM) & Z2 (BAM) 30mm ‘classic’
“Venditore preciso e affidabile al 100% Tutto perfetto anche con piccolo regalo ?? Consigliatissimo!”

[20210911] Siro from Trieste, Italy  – Fork : Marzocchi Z3 1997
Product sold : 30mm Bomber ‘classic’ Seal kit
“Buongiorno, i pezzi per la bicicletta sono arrivati e le caramelle per me anche!!!
Buone le caramelle e anche i paraolio e para polvere, fantastici!!
Voi sapere quanto olio devo mettere dentro alle forcelle? (Marzocchi Z3 del 97)
Grazie. Un saluto da Trieste.”

[20210903] Ralf from Nürnberg, Germany – Fork : Marzocchi Z3
Product sold : Full Fork Service Z3
“Hallo Marcus, 
die Gabel ist angekommen und ich bin begeistert! Vielen Dank auch für die zusätzlichen Dichtringe und die Gummibärchen!!!
Wie kann ich die Dämpfung etwas weicher einstellen und welche Funktion haben eigentlich die Einstellschrauben jeweils auf den Standrohren?
Beste Grüße, 
Ralf”

Not sure about your Forks Seal size and Type???

Check my personal Marzocchi FORK <-> SEALS Database!! 

Dimensions of Marzocchi Steerer

ZollSteerer mm (top)Steerer mm (bottom)
1 "25,400 mmca. 27,20 mm
1 1/8 "28,575 mmca. 30,15 mm
1 1/4 "31,750 mmca. 33,00 mm

SHIPPING TIME
You will receive your goods from us fast! After receipt of payment, you can expect packaging, shipping delivery of your parcel ASAP.
All sendings will be sent tracked!
Shipping takes usual 1-3 days in GER using DHL, but might take longer in EU and world wide (Hermes / DHL).
Stickers will be send by ‘Deutsche Post international registered letter’.

REBULDS
Please allow 7-14 days for rebuilding depending on work load. Sometimes I need more time depending on current family needs 😉 <br>

There has been only one version of the Bomber Canti Hanger created by Marzocchi for the early Bombers in the 90’s. Tt has been introduced with the legendary Marzocchi Bomber Z1 in 1996!

It fits in this Marzocchi Bombers :

  • all Models with a boltened Brace

A lot of people have tried to create copies of this product as it is a rare one.

Have a look here :

  • Alternative Canti Hanger Ebay 20220125Current Ebay Offer [20220125]
    My personal Comment : It is a realy nicely done milled version and took a lot of time to produce for sure!
    You probably now I tried a milling version some years ago (40 pcs) and know about all the problems in production.
    I did not like the result and that’s why I tried again!
    But in the end this Ebay version lacks details, it is more expensive (+ Shipping from China) and looks like a ‘constructed version’ having ‘sharp’ edges, champfers instead of roundings, not that nice countersinkings, not mirror polished etc.The Marzocchi Original one has it’s own italian design, it is a little bit ’round’ everywhere on the model – even the flat surfaces, I believe it is from polishing process –  and has a unique form, which can’t be milled.😉
    But hey, you are old and wise enough : choose the version you like! 👍🔧🦾

Related products

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping
      Calculate Shipping