Marzocchi Bomber used crown for 1 1/4″ steerer, used; stanchion tube diameter 30mm.
Can also be used with 1″ and 1 1/8″ steerer using a shim.
Availibility is changing every week, so please ask.
Original price was: 159,00 €.149,00 €Current price is: 149,00 €. VAT included
Original Marzocchi Bomber crown for 1 1/4″ steerer; used, but very good condition!
This crown is from a Marzocchi Z5 Alloy, the crown is from 1998.
Screw set included.
You can find me at Ebay: http://www.ebay.de/usr/dr_marzocchi
Out of stock
Marzocchi Bomber used crown for 1 1/4″ steerer, used; stanchion tube diameter 30mm.
Can also be used with 1″ and 1 1/8″ steerer using a shim.
Availibility is changing every week, so please ask.
Seals Assembling
When mounting the Oil Seals put crease between the inner lips of the seals before pushing the stanchions in!
Important : Use a suitable tool to press the Oil Seal verticaly in!! If you don’t do that, the metal skeleton will bend.
Seals ‘Break-in Period’
“Some forks may require 5-10 hours of use before the fork fully breaks-in. After the bushings, seals, and other parts have matched to each other, the fork will move smoother. The tight tolerances make the fork last longer and work better.” (original text from Marzocchi Bomber Technical Information (2000) )
Knob / Dial Installation Instructions
Please glue the little screw of the dials with a little bit of middle hard screw glue. And use heat if you want to take it off than.
Sticker Instructions
Please use the sticker only in conditions >=20°C environment to make sure the glue will work and make the tubes oil- and grease-free using isopropanol etc.
Not sure about your Forks Seal size and Type???
Zoll | Steerer mm (top) | Steerer mm (bottom) |
---|---|---|
1 " | 25,400 mm | ca. 27,20 mm |
1 1/8 " | 28,575 mm | ca. 30,15 mm |
1 1/4 " | 31,750 mm | ca. 33,00 mm |
SHIPPING TIME
You will receive your goods from us fast! After receipt of payment, you can expect packaging, shipping delivery of your parcel ASAP.
All sendings will be sent tracked!
Shipping takes usual 1-3 days in GER using DHL, but might take longer in EU and world wide (Hermes / DHL).
Stickers will be send by ‘Deutsche Post international registered letter’.
REBULDS
Please allow 7-14 days for rebuilding depending on work load. Sometimes I need more time depending on current family needs 😏