To be able to send you the correct Stickers you need to send us the colour of your Fork, please!
Sum : > 200,00€ –> Your price : 144,99€. You will save about 40%!! 🧨🎈🚀🎁
+++ In my Complete Rebuild-Kits are more parts than in the original Marzocchi ones!! +++
Other parts have been reproduced by myself because they are out of stock worldwide (!) like the Conic Lip Seal Part. No 313 and the Rubber Damper Ring Part No.143 (Part of the Top-Bushing!) in XC600/XC700 Service Kits!!
Marzoccchi Rebuild-Kit Specifications References :
++ Kits for Fork not listed are available on Request!! ++
XC400 :
- Marzocchi LARM No. 16.5050
- Marzocchi Art. No. 211347
XC500 :
- Marzocchi Repair Kit XC500 – Marzocchi Art.-No. 850515/C
- Marzocchi Repair Kit XC500 – Marzocchi LARM No. 16.5104
- Marzocchi No. 211347
XC51 :
- Marzocchi Repair Kit XC51 – Marzocchi LARM No. 165115
XC600 / XC700 :
- Marzocchi LARM No. 16.5133
- Marzocchi Art. No. 211350
XCR :
- if you own a later XCR with the dials from DH3 please drop, me note. I will send you the DH3 related o-Rings for the dials.
- Marzocchi LARM No. 16.5133
- Marzocchi Art. No. 211350
- Marzocchi Repair Kit XC-R / DH3 No. 850532/C
DH3 :
- Marzocchi LARM No. 16.5133
- Marzocchi Art. No. 211350
- Marzocchi Repair Kit XC-R / DH3 No. 850532/C
Seals Assembling
When mounting the Oil Seals put crease between the inner lips of the seals before pushing the stanchions in!
Important : Use a suitable tool to press the Oil Seal verticaly in!! If you don’t do that, the metal skeleton will bend.
Seals ‘Break-in Period’
“Some forks may require 5-10 hours of use before the fork fully breaks-in. After the bushings, seals, and other parts have matched to each other, the fork will move smoother. The tight tolerances make the fork last longer and work better.” (original text from Marzocchi Bomber Technical Information (2000) )
Knob / Dial Installation Instructions
Please glue the little screw of the dials with a little bit of middle hard screw glue. And use heat if you want to take it off than.
Sticker Instructions
Please use the sticker only in conditions >=20°C environment to make sure the glue will work and make the tubes oil- and grease-free using isopropanol etc.
Not sure about your Forks Seal size and Type???
Check my personal Marzocchi FORK <-> SEALS Database!!
Dimensions of Marzocchi Steerer
| Zoll | Steerer mm (top) | Steerer mm (bottom) |
| 1 " | 25,400 mm | ca. 27,20 mm |
| 1 1/8 " | 28,575 mm | ca. 30,15 mm |
| 1 1/4 " | 31,750 mm | ca. 33,00 mm |
SHIPPING TIME
You will receive your goods from us fast! After receipt of payment, you can expect packaging, shipping delivery of your parcel ASAP.
All sendings will be sent tracked!
Shipping takes usual 1-3 days in GER using DHL, but might take longer in EU and world wide (Hermes / DHL).
Stickers will be send by ‘Deutsche Post international registered letter’.
REBULDS
Please allow 7-14 days for rebuilding depending on work load. Sometimes I need more time depending on current family needs 😏
This REBUILD-KIT ‘COMPLETE’ is available for the following Marzocchi Forks :
- Marzocchi XC400 (1992+)
- Marzocchi XC500 (1994+)
- Marzocchi XC51 (1994+)
- Marzochi XC600 (1994+)
- Marzocchi XC700 (1996+)
- Marzocchi XCR (1995+)
- Marzocchi DH3 (1996)
The Tools and Seals can be used for some other forks as well, but not all!
