22,50 €
This tool is used for pressing the 38mm oil seal into the lowers top. The smaler bottom section is long enough to keep the tool vertical as this is most impoartant to press the oil seal in!
You can also use it to press the dust seal in, but take that little outer ring spring out of the dust seal before you do!!
21 in stock (can be backordered)
This is my own optimzed version where I changed the material to impact-resistant plastic to do oil seal press-ins without damaging the slider, bushings or seals!!
Use it with a plastic hammer only!
for all 32mm Bomber forks
Seals Assembling
When mounting the Oil Seals put crease between the inner lips of the seals before pushing the stanchions in!
Important : Use a suitable tool to press the Oil Seal verticaly in!! If you don’t do that, the metal skeleton will bend.
Seals ‘Break-in Period’
“Some forks may require 5-10 hours of use before the fork fully breaks-in. After the bushings, seals, and other parts have matched to each other, the fork will move smoother. The tight tolerances make the fork last longer and work better.” (original text from Marzocchi Bomber Technical Information (2000) )
Knob / Dial Installation Instructions
Please glue the little screw of the dials with a little bit of middle hard screw glue. And use heat if you want to take it off than.
Sticker Instructions
Please use the sticker only in conditions >=20°C environment to make sure the glue will work and make the tubes oil- and grease-free using isopropanol etc.
Not sure about your Forks Seal size and Type???
Check my personal Marzocchi FORK <-> SEALS Database!!
| Zoll | Steerer mm (top) | Steerer mm (bottom) |
|---|---|---|
| 1 " | 25,400 mm | ca. 27,20 mm |
| 1 1/8 " | 28,575 mm | ca. 30,15 mm |
| 1 1/4 " | 31,750 mm | ca. 33,00 mm |
SHIPPING TIME
You will receive your goods from us fast! After receipt of payment, you can expect packaging, shipping delivery of your parcel ASAP.
All sendings will be sent tracked!
Shipping takes usual 1-3 days in GER using DHL, but might take longer in EU and world wide (Hermes / DHL).
Stickers will be send by ‘Deutsche Post international registered letter’.
REBULDS
Please allow 7-14 days for rebuilding depending on work load. Sometimes I need more time depending on current family needs 😉 <br>
Value added tax is not collected, as small businesses according to §19 (1) UStG.
Axle Clamp QR20 Axle Clamp (2001 - 2002+) - IN PRODUCTION NOW!!
24,99 €
Value added tax is not collected, as small businesses according to §19 (1) UStG.
Axle Clamp QR20 Fixing Bits (2003 - 2004+) - IN PRODUCTION NOW!!
24,99 €
Value added tax is not collected, as small businesses according to §19 (1) UStG.
Value added tax is not collected, as small businesses according to §19 (1) UStG.
Value added tax is not collected, as small businesses according to §19 (1) UStG.
