Details :
- 2x (!!) Seal-Kit 40mm
- a Set of New BUSHINGS 4pcs –> 2x upper, 2x lower (custom, my own production!)
- Marzocchi Ahead Cap ‘Fear Nothing’ (you can select the colour you want out of 9 colours!!)
- 1x Slider Protector Tool 40mm= 24,99€
- 1x Oil Seal Insertion Tool 40mm = 24,99€
- 2x new Knobs incl. Screws = ~30,00€ (you can choose out of 4 tape/colours!!)
- 2x O-Rings Footnut
- 2x O-Rings Top Cap 40mm
- 2x O-Rings Top Cartridge (if needed, depends on model)
- 2x O-Rings inner Compression Cartridge Needle (if needed, depends on model)
- 2x O-Rings for the deflating screw in the top cap (if needed, depends on model)
- 2x C-Rings top Cartridge made out of stainless steel (if needed, depends on model)
- 1x SAG O-Ring (incl. in the seal kits)
- a full Set of Screws V2A
Compatibility :
- Monster 40mm 2002 – 2006 (check details, main seals will fit)
- …
Picture from original Marzocchi product for comparism only!
»» Brand Names & Logos reproduced belong to their respective registering owners. ««
»» PERSONAL USE ONLY! ««
Seals Assembling
When mounting the Oil Seals put crease between the inner lips of the seals before pushing the stanchions in!
Important : Use a suitable tool to press the Oil Seal verticaly in!! If you don’t do that, the metal skeleton will bend.
Seals ‘Break-in Period’
“Some forks may require 5-10 hours of use before the fork fully breaks-in. After the bushings, seals, and other parts have matched to each other, the fork will move smoother. The tight tolerances make the fork last longer and work better.” (original text from Marzocchi Bomber Technical Information (2000) )
Knob / Dial Installation Instructions
Please glue the little screw of the dials with a little bit of middle hard screw glue. And use heat if you want to take it off than.
Sticker Instructions
Please use the sticker only in conditions >=20°C environment to make sure the glue will work and make the tubes oil- and grease-free using isopropanol etc.
Not sure about your Forks Seal size and Type???
Check my personal Marzocchi FORK <-> SEALS Database!!
Dimensions of Marzocchi Steerer
| Zoll | Steerer mm (top) | Steerer mm (bottom) |
| 1 " | 25,400 mm | ca. 27,20 mm |
| 1 1/8 " | 28,575 mm | ca. 30,15 mm |
| 1 1/4 " | 31,750 mm | ca. 33,00 mm |
SHIPPING TIME
You will receive your goods from us fast! After receipt of payment, you can expect packaging, shipping delivery of your parcel ASAP.
All sendings will be sent tracked!
Shipping takes usual 1-3 days in GER using DHL, but might take longer in EU and world wide (Hermes / DHL).
Stickers will be send by ‘Deutsche Post international registered letter’.
REBULDS
Please allow 7-14 days for rebuilding depending on work load. Sometimes I need more time depending on current family needs 😉 <br>
